If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
Other ItemsFeedbackContact UsAdd To Favourites
Support We understand that everyone has a different level of ability so we have a dedicated team to support our customers with pre and after sales. If you require any support at all you can contact our dedicated support team via our FREE phone during office hours and till 8pm 7 days a week via email. Our contact details are at the bottom of this listing.
PPI AC or DC Point Position Indicator with Built in Mega CDU + Pre-Wired LED Kit4 channel point position indicator with built in capacitor discharge unit for model railway point motor switching and indication.With a built in CDU (Dual or Mega) this circuit eliminates the need for extra circuitry and from one supply can control all your point motors and LED indicators. The built in CDU provides a fast smooth DC voltage direct to your point motors to ensure smooth switching.The Dual CDU version has virtually 10,000uf which ensures fast responsive action when switch two or more points at any one time.The Mega CDU version has four capacitors with virtually 20,000uf which ensures fast responsive action when switching up to four points at any one time or for larger layouts were point motors and some distance away. Remembers points position, even after the power has been turned off Built in Capacitor Discharge Unit (CDU) Monitors up to 4 sets of points Supplied with 4 red and 4 green led’s 8 resistors LED panel mounting Clips PCB stand offs for mounting your circuit board safely Operates from 16V to 20V ac or dcThe below wiring diagram shows channel 1 (L1 + T1) connected to point motor, point motor switch and red/green positioning LED’s the same will need to be duplicated for channel 2 (L2 +T2), channel 3 (L3 + T3) and channel 4 (L4 +T4)Circuit terminal connection points Terminal 1 is the positive supply which goes to your momentary switched supply to your point motors Terminal 2 is the common supply to all your point motors Terminal 3 is the common supply to your indicator LED’s Terminal 4 & 5 are the circuit power supply, this should be between 16v & 20v AC or DC. If using DC please make sure you wire the positive and negative the correct way round. Terminal 4 should be Negative and terminal 5 should be positive. If using AC polarity does not matter as the circuit will rectify the polarity for you and create a smooth DC voltage. Terminal 6 through to 9 are for channel 1 (1st point motor) Terminal 10 through to 13 are for channel 2 (2nd point motor) Terminal 14 through to 17 are for channel 3 (3rd point motor) Terminal 18 through to 21 are for channel 4 (4th point motor)Point motor channel wiring:channel 1 (1st point motor) For our example we have used 1 SPDT miniature momentary toggle switch, this is a sprung switch and will revert back to the center position when released. These switches have 3 pins; the center pin is the common positive which should be wired to your circuit at terminal 1 the positive supply for point motors. The remaining two outputs of your switch should be wired as so: Switch output 1 to terminal 6 marked as T1 of the circuit board and one side of your point motor witch output 2 to terminal 7 marked as T1 of the circuit board and one the other side of your point motor Terminals 8 and 9 marked as L1 are the positive supply to your LED’s. One supply to each LED. On the circuit board T1, T2, T3, T4 represent Triggers from your point motor switch T1 for channel 1, T2 for channel 2, T3 for channel 3 and T4 for channel 4 L1, L2, L3 L4 represent Live LED supplies for each channelYou now need to reproduce the above wiring for each channel and point motors you require switching. Please take note for each channels LED supply and triggers on the circuit wiring diagram before wiring each further channel.Depending on the position of your points either the red LED or the Green LED will be lit.If you need assistance in wiring the circuit please feel free to ask, our dedicated support team can assist you via email or over the phone.
About UsWith over 15 years of experience in the electronics industry Modelling Electronics are a professional, family run business for the manufacture and supply of a range of electronic components, switches and electronic circuits dedicated to the hobbyist. Our electronic components and switches are aimed at hobbyists such as, model rail / model railroad, dolls houses and electronic enthusiasts.All our circuits are made by humans rather than assembly lines so that we can help growth by employing staff within the UK. By buying from us your are helping employment levels within the UK.
FAQ’s, Tutorials & ProjectsIf you are interested in electronics or developing your own printed circuit boards we offer a number of FREE tutorials and projects which you can read on our website and also download a pdf version. We also have created a common frequently asked questions section to help users. This covers things like an LED resitor calculator, all about diodes and capacitors plus much more.If you require access to these FREE tutorials please feel free to contact us or visit our website.
Terms & ConditionsDue to the sensitivity of these circuits and components, (due to damage incurred by incorrect wiring) we can only accept returns and issue a refund once our engineers have fully tested and confirmed the component or circuit is fully working. We test each circuit before it leaves our factory, which is then verified by a senior team member and signed off. Please make sure you read our website for product data sheets and wiring instructions before you connect your component or circuit.
Delivery & Returns Delivery Delivery to UK addresses will normally be despatched the same working working day if your order is placed before 1pm. We always hold enough stock to meet all orders, and all stock is held within our UK outlet.Payment Online orders via eBay can only be paid for via PayPal, with PayPal you can use your debit/credit card or your PayPal balance. Returns Unwanted Goods: Please contact us within 30 days of purchase to obtain a returns number, this must be clearly marked on any returns note. Goods must be returned to us at your own cost and in the same condition that they were received, including packaging, manuals and all accessories. Incorrect/missing/faulty: Should you need to contact us with regards to the contents of your order, whether you have missing, incorrect or faulty goods, please contact us using the Business Seller Information below.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Collectables:Model Railways and Trains:OO Gauge:Parts and Accessories:Signals
Location: Southport