If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
ESU 64618 Lokpilot V4.0 M4 Mki, Multi-Protocol MM / DCC/SX / M4, 21MTC New
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
ESU 64618 LokPilot V4.0 M4 MKL, multiprotocol MM / DCC / SX / M4, 21MTC new item
This LokPilot decoder is a real quad protocol decoder and speaks not only DCC with RailComPlus but also Motorola, Selectrix and M4. It is only supplied with a 21-pin interface with 6 amplified function outputs especially for newer Mrklin locomotives. This decoder is therefore the first choice for all Mrklin friends who do not want to do without mfx compatibility.Operating modesThe LokPilot V4.0 M4 MKL masters the data format DCC as well as Motorola, Selectrix and M4. In DCC format, 14-128 speed steps are as natural as 2- and 4-digit addresses and up to 28 functions. Thanks to RailComPlus, the decoders log on to a suitable digital center fully automatically. It masters all DCC programming modes and can be operated as well as programmed with compatible digital centers: Thanks to RailComPlus, it is possible to read out the CV values on the main track with suitable centers. Auxiliary registers exist for control centers that can only program CVs from 1-255.
Motorola users benefit from up to 28 speed steps with 255 addresses. Three additional Motorola addresses enable the activation of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021. The M4 protocol enables automatic registration at mfx-compatible control centers (e.g. Mrklin Central Station or Mobile Station). Reprogramming is also possible at these centers, just as you are used to from the original Mrklin decoders. The LokPilot V4.0 M4 MKL decoder recognizes the Mrklin braking sections as well as the ZIMO HLU braking commands or the Lenz ABC system. Braking with DCC brake modules or with
DC voltage is possible. It also stops with a Selectrix brake diode.
The LokPilot V4.0 M4 MKL decoder can be used on analog DC and AC circuits. The decoder switches between the operating modes fully automatically “on-the-fly”. Usually nothing needs to be set.Engine controlThe LokPilot V4.0 M4 MKL is equipped with a fifth generation motor control. With the help of 6 parameters, the load control can either be adapted to the model manually, or the decoder uses “Auto-Tune” to measure the engine properties in a test run and adjusts itself accordingly. Adapting to motors has never been easier. ESU decoders control all types of motor, regardless of whether Mrklin motors, Fleischmann round motors, bell-armature motors (e.g. Faulhaber) or middle motors with flywheel (s). With Dynamic Drive Control (DDC) you limit the influence of the load control and can regulate sensitively in the station area, while the locomotive slows down prototypically when driving uphill. SoftDrive sinus motors, such as those used in many Mrklin models, can also be controlled by the LokPilot V4.0 decoder. Thanks to SUSI, this also works with Trix locomotives.FunctionsThe LokPilot V4.0 M4 MKL decoder has six amplified function outputs on a 21-pin interface. This decoder was developed for newer Mrklin locomotives because they differ from the NEM 660 or VHDM RCN-121 standard at outputs AUX3 and AUX4 expect an amplified output (instead of the logic level output). All important lighting functions are available. The brightness of each output can be adjusted separately. The decoder masters the automatic pressing and detaching when uncoupling for ROCO, Krois and Telex couplings.Operational safetyYou can use the LokPilot V4.0 M4 MKL like any other ESU decoder of the 4th Generation can connect a PowerPack (ESU item no. 54671).protectionOf course, all function outputs and the motor output are protected against overload. _____________________________________________________
______________________________________________________
– please use the Ebay shopping cart and the payment processing, then the shipping costs will be summarized correctly. – You will receive an email with the package number for tracking the shipment – Of course, you will receive an invoice with VAT for each new goods purchase from the specialist dealer – We usually process your order or request within 24 hours on working days ESU 64618 LokPilot V4.0 M4 MKL, multiprotocol MM / DCC / SX / M4, 21MTC new item Operating modes DC voltage is possible. It also stops with a Selectrix brake diode. Engine control Functions Operational safety protection Of course, all function outputs and the motor output are protected against overload. _____________________________________________________ ______________________________________________________ – You will receive an email with the package number for tracking the shipment – We usually process your order or request within 24 hours on working days Marke ESU EAN Nicht zutreffend Modifizierter Artikel Nein Herstellernummer 64618 Auslndisches Produkt Nein Angebotspaket Nein Produktart Funktionsdecoder Steuerung Digital
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Collectables:Model Railways and Trains:Power and Control:Decoders
Location: Hauzenberg