If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
ESU 54612 Locomotive Driver V 4.0 MM Or DCC Or SX, With 6-poligem Plug New
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
ESU 54612 Lokpilot V 4.0 MM or DCC or SX, with 6-pin connector, new item
Operating modesThe LokPilot V4.0 speaks like its predecessors DCC, Motorola and Selectrix. It can also be used in direct and alternating current operation and automatically recognizes the operating modes “on-the-fly”. Up to 9999 addresses in DCC mode or 255 in Motorola mode are a matter of course. The LokPilot V4.0 recognizes all common braking sections such as Zimo HLU, Mrklin or Selectrix diode braking section. New is the ABC braking mode introduced by Lenz for simple signal hold thanks to the asymmetrical DCC signal. The LokPilot V4.0 of course also fully supports the RailCom standard and can be programmed with Allen common digital centers. The connection option for an external “PowerPack” is also new. This (from 2011) optionally available energy storage device can supply the motor for up to 2 seconds in the event of a power failure and finally makes dirty rails forget! Engine controlYou are right to expect excellent engine control from a LokPilot decoder. With the LokPilot V4.0, ESU provides the again improved load control of the 5th Generation before. At a base frequency of 40 kHz, the control frequency is adaptively adapted to the speed. The result is an even better low-speed behavior, especially with older 3-pole motors or bell-armature motors. In addition, the control can be easily adapted to the model. With this, ESU sets the new standard. You won’t find a better arrangement anywhere. Promised. mechanicsDespite all the new functions, the new LokPilot V4.0 is 9% smaller than its predecessor and thus even easier to install. In addition to the familiar versions with an 8-pin and 6-pin NEM interface and a version with a 21MTC interface, there is now also a version with a PluX12 connector (on the cable harness) that can be plugged directly into many new ROCO locomotives. Analog functionsWith the LokPilot V4.0 you can not only set the start-up and maximum speed of your locomotive in analog mode and determine which of the functions should be active: even the load control is active! This makes the LokPilot V4.0 ideal for analog locomotives that were previously too fast with a switch! Finally, your locomotives crawl in analogue operation as slowly as you are used to in digital systems. FunctionsThe LokPilot V4.0 decoder has four functional outputs, each with a load of 250mA, which is individually regulated in terms of brightness and with different lighting effects such as flashing light, firebox simulation, flash and double bit, Ditch Light etc. can be occupied. The version with 21MTC interface also has two logic outputs, which you can bring to life with the help of the 51968 adapter board. Of course, the decoder masters the automatic pressing and pulling when uncoupling for Roco, Krois and Telex couplings and now also offers a high beam function. The “LED mode” ensures correct lighting effects when using LEDs. To adjustThe LokPilot V4.0 supports all DCC programming modes including POM (main track programming). All settings are also made electronically for Mrklins control centers 6020, 6021, mobile station and central station. For these control centers, the LokPilot V4.0 decoder masters a proven, easily manageable setting procedure. Changes made in Motorola mode also have an effect in DCC and Selectrix mode and vice versa. Setting the parameters is particularly convenient for owners of our ECoS control center: all options are displayed in plain text on the large screen and can be changed in the simplest way – even during operation. Operational safetyThe LokPilot V4.0 supports the wrong-way drive bit, which is essential for operation on Mrklin systems, so that locomotives entering an analog section into a digital section do not immediately drive backwards again. After an interruption in operation, the decoder starts up again as quickly as possible thanks to storage. ComfortThe LokPilot V4.0 is protected against short-circuit and overload, can be updated and is conveniently programmable on the PC with the help of the ESU LokProgrammer. A brand new software for the brand new decoder can be downloaded from our website. The software helps you to configure the decoder. So much comfort must be. With the LokPilot V4.0 you not only buy a very good decoder, but also benefit from ESU’s years of experience in the production of innovative digital decoders.Goods are brand new and in the original box.______________________________________________________
______________________________________________________
– please use the Ebay shopping cart and the payment processing, then the shipping costs are summarized correctly. – You will receive an email with the package number for tracking – Of course, you will receive an invoice with VAT for each new goods purchase from the specialist dealer – We usually process your order or request within 24 hours on working days ESU 54612 Lokpilot V 4.0 MM or DCC or SX, with 6-pin connector, new item Operating modes Engine control mechanics Analog functions Functions To adjust Setting the parameters is particularly convenient for owners of our ECoS control center: all options are displayed in plain text on the large screen and can be changed in the simplest way – even during operation. Operational safety Comfort Goods are brand new and in the original box. ______________________________________________________ ______________________________________________________ – please use the Ebay shopping cart and the payment processing, then the shipping costs are summarized correctly. – You will receive an email with the package number Herstellernummer 54612 Marke ESU Herstellungsjahr 2015 EAN Nicht zutreffend
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Collectables:Model Railways and Trains:HO Gauge:Other HO Gauge
Location: Hauzenberg