If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to see similar items on eBay, and to buy.
ESU LokSound 5 MICRO 58820 Premium Sound Decoder
Premium DCC N-Scale decoder with NEXT18 interface, no speaker
Dimensions: 21 mm x 10 mm x 4(5 at connector) mm
Free uploading of ESU Sound Project (V4.0 sounds can be used as well) , see:
http://projects.esu.eu/
Please leave a note with the ESU sound project number when checking out otherwise the decoder will be send out with a test sound only.
The LokSound 5 micro is actually a small miracle: With a footprint of 21mm x 10 mm it is by far the smallest LokSound decoder, which we have ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound decoders are equipped with a Next18 interface and are available with adapter plugs to suit all popular digital interface types. The decoder is supplied with an 11mm x 15mm sugar cube speaker as well as a sound enclosure set. Operating modesThe LokSound 5 micro is a true multi protocol decoder. It supports DCC as well as Motorola, Selectrix and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus the decoders register themselves fully automatically on suitable command stations. This decoder supports all DCC programming modes and thanks to RailCom you may read out the CV values on the main, provided you have a command station supporting RailCom. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255.Motorola users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Control Unit 6021.The M4 protocol supports the automatic registration on mfx compatible central units. The LokSound decoder supports the Mrklin braking sections just as well as the ZIMO HLU braking commands or the Lenz ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.The LokSound 5 micro decoder is also suitable for analogue DC and AC (!) layouts.SoundThe LokSound 5 micro decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit / 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A double class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity.The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles.FunctionsDespite its small dimensions the LokSound 5 micro decoder has at least 6 amplified function outputs as well as one logic output. There are two more logic outputs on the Next18 interface, which alternately may be employed to control RC servos. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements known as the coupler waltz – required for reliable operation of digital couplers such as the ones by ROCO and Krois as well as Telex couplers. Motor controlMotor control of the LokSound 5 micro has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique Auto Tune function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 0.75 A) for the intended applications.LokSound 5 micro DCCThe LokSound 5 Micro DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts.
Some comments from Martin:
1) The new LokSound 5 MICRO has a NEXT18 connector as the primary interface to the printed circuit board.
All other interfaces are connected via this connector and therefore the decoder has a little hump at the location of the connection (see photos).
2) For better sound results use a 4 Ohms speaker system (e.g. 2 Sugar cubes in parallel), like the new ESU kit 50340.
3) For even better results I can supply a custom speaker with one or two (smaller or larger) speakers in a 3D printed custom made enclosure. All I need are the dimensions in w x l x h, cost for a single speaker is $25 and a dual speaker $30 (See separate listings).
4) These new LokSound 5 have many new features, for example you can select many different individual sounds, set the notching steps on diesel and have different load and brake scenarios. Also the motor tuning parameters have been updated. But you can get all the benefits only when the decoder is matched and tuned to your individual loco. To do this ‘by hand’ is almost impossible and I highly recommend to use the ESU Programmer ESU 53451 for this purpose for you to get the best out of your loco. Done right the results can be amazing, even with older/cheaper locos.
Included in the price:
– Postage (shipped in CD mailer without the original box/manual).
– For customers requiring tracking pls. use the Express Post option.
– Uploading of ESU sound project.
– Tested and fitted with the latest firmware prior shipping.
– 2 Year factory warranty (we are an official ESU retailer).
– After sales service and advice.
If you buy after clicking affiliate links on this site we might receive a commission from companies such as eBay, Amazon etc This does not affect the price you pay.
Click here to buy, and to see similar items on eBay
Category: Toys, Hobbies:Model Trains:HO Scale:Parts and Accessories:Other
Location: Coonabarabran, NSW